Configuration-System Folder; Time Service Settings; Figure 5-2 Configuration Folder, System Subfolder; Figure 5-3 Configuration Folder, System Subfolder, Time Service - Emerson Liebert Intellislot Unity Card User Manual

5.4.1 Configuration—System Folder
The System subfolder displays general information about the monitored and managed device and the
display of some data. Refer to Figure 5-2. The data displayed is set by the user and can assist in
troubleshooting. To alter the information displayed, click on the Edit button, enter the administrator name
and password and make changes. Click Save to save the changes; click Cancel to discard the changes.

Figure 5-2 Configuration folder, System subfolder

5.4.1.1

Time Service Settings

The System Subfolder contains one folder: Time Service. Each setting offers either a menu of choices or
an enable/disable check box. Users can set these parameters
Figure 5-3 Configuration folder, System subfolder,
Time Service setting options
External Time Source
The external source to be used for time synchronization.
NTP Time Server
Network Time Server (NTP) URL or IP address
NTP Time Sync Rate
The rate at which time will be synchronized with the Network Time Protocol server, if NTP is the external
time source.
Time Zone
Time zone where the device is located.
Enable Auto-Sync to Managed Device
Enable automatic writing time to the managed device.
Managed Device Auto-Sync Rate
Rate at which time will be written to the managed device, if an external time source has been selected.
Editing the Liebert IntelliSlot Unity Card Configuration
Enter the information in the dialog boxes and choose
temperature display, either Celsius or Fahrenheit
Time Service
®
41 Liebert IntelliSlot
™
™
Unity Card User Manual