Snmpv3 User Folder - Emerson Liebert Intellislot Unity Card User Manual

Editing the Liebert IntelliSlot Unity Card Configuration
5.5.3.1

SNMPv3 User Folder

The Liebert IntelliSlot-Unity card supports up to 20 SNMPv3 users. The top level page has a table with
settings for all 20. The page displays a link to edit the table columns displayed for each SNMPv3 user. The
same settings may be accessed by clicking on a folder for a user, such as SNMPv3 User [1].
The Web page below shows the settings that can be changed for a SNMPv3 user. To display the settings,
click on any of the SNMPv3 User links. After making any changes, click Save to make the changes
effective; click Cancel to discard the changes.
SNMPv3 User Settings
SNMPv3 User Enable
Select to enable read, write or sending notifications with the user's credentials.
SNMPv3 Username
The User name the authentication and privacy settings apply to. This string can be composed of printable
characters except colon, tab, double quote, and question mark.
SNMPv3 Access Type
Read Only, Read/Write or Traps only
SNMPv3 Authentication
Cryptographic algorithm used for authentication: None, MD5 or SHA-1
SNMPv3 Authentication Secret
Pass phrase or password used for SNMPv3 Get request. This string can be composed of printable
characters with the exception of colon, tab, double quote, and question mark. Note: The entry must be 8 or
more characters but not more than 64.
® ™
Liebert IntelliSlot Unity
™
Card User Manual
Click on a SNMPv3 User folder or
a link to get this settings page.
62