3.1.2
Enable BACnet Protocol
NOTE
Contact your system administrator or building management system administrator if you are
uncertain about the settings.
1. Select Communications tab > Protocols > BACnet.
2. Click Edit and enter a user name and password if required.
3. Enter the Managed Device Write Access level (Read Only or Read/Write).
This determines a user's ability to change settings in the Liebert IntelliSlot Unity card.
4. Choose the BACnet interface: BACnet IP or BACnet MSTP.
5. Set the Device Object Instance Number.
6. Set the Device Object Name.
7. Set the APDU Timeout.
8. Set the APDU Retries.
9. Click Save to confirm the changes or Cancel to discard them.
10. Configure the BACnet interface chosen, see 3.1.2.1 - Configure BACnet IP Protocol or 3.1.2.2 -
Configure BACnet MSTP Protocol.
For description of the settings, see 5.5.1 - Protocols—BACnet Folder.
Figure 3-4 BACnet protocol settings
®
19
Liebert
IntelliSlot
Enable Communication Protocols
™
™
Unity
Card User Manual