Configure Snmpv1 Trap Settings; Figure 3-10 Snmpv1 Trap Settings - Emerson Liebert Intellislot Unity Card User Manual

3.1.3.1.3

Configure SNMPv1 Trap Settings

1. Select Communications tab > Protocols > SNMP > SNMPv1 Trap (20).
2. Click Edit and enter a User name and password if required.
3. Enter the information and set the permissions appropriate to the user, Figure 3-10.
For descriptions of the settings, see 5.5.3.3 - SNMPv1 Trap Folder.
4. Click Save to confirm the changes or Cancel to discard them.
5. Repeat Steps 1 through 4 for any additional users.
6. Restart the card to confirm the changes.
a. Select the Communications tab > Support.
b. Enable the commands.
c. Click Restart.

Figure 3-10 SNMPv1 trap settings

®
25 Liebert IntelliSlot
Enable Communication Protocols
Settings required
for each address
that will receive
SNMP notifications.
™
™
Unity Card User Manual