Snmpv1/V2C Access Folder - Emerson Liebert Intellislot Unity Card User Manual

Editing the Liebert IntelliSlot Unity Card Configuration
5.5.3.4

SNMPv1/v2c Access Folder

This page contains settings for network hosts that can access data using SNMPv1/v2c. Up to 20 access
hosts can be enabled and configured. Like the SNMPv3 pages, the setting for each host may be reached
by clicking on the links in the data portion of the page or by clicking on the folders for the access hosts.
Also, data shown in the table may be changed by clicking on the link above the table.
SNMPv1/v2c Access Settings
SNMP Access IP Address
Configure network hosts interested in device information access. The host can be identified as either an IP
address or the host's network name
SNMP Access Type
SNMPv1/v2C access type: Read Only or Read/Write
SNMP Access Community String
SNMP Community String
® ™
Liebert IntelliSlot Unity
™
Card User Manual
Click on this link to change
the information shown in the
table on this page to the
information shown below.
66
Click on a SNMPv1/v2c Access
folder or a link to get this
settings page.