Configure Snmpv1/V2C Access Settings; Figure 3-11 Snmpv1/V2C Access Settings - Emerson Liebert Intellislot Unity Card User Manual

Enable Communication Protocols
3.1.3.1.4

Configure SNMPv1/v2c Access Settings

1. Select Communications tab > Protocols > SNMP > SNMPv1/v2c Access (20)
> SNMPv1/v2c Access (1).
2. Click Edit and enter a User name and password if required.
3. Enter the information and set the permissions appropriate to the user, Figure 3-10.
For description of the settings and options, see 5.5.3.4, SNMPv1/v2c Access Folder, page 66.
4. Click Save to confirm the changes or Cancel to discard them.
5. Restart the card to confirm the changes.
The card must be restarted before another user's settings may be changed.
a. Select the Communications tab > Support.
b. Enable the commands.
c. Click Restart.

Figure 3-11 SNMPv1/v2c Access settings

® ™
Liebert IntelliSlot Unity
™
Card User Manual
Selecting the SNMPv1/v2c Access
folder will bring up the settings
that may be changed.
26