Getting Started; Cautions And Warnings; Inspection Checklist - GE Multilin 745 Instruction Manual

Important Procedures

Cautions and Warnings

Inspection Checklist

NOTE
GE Multilin

1 Getting Started

Important Procedures
Please read this chapter to guide you through the initial setup of your new relay.
Before attempting to install or use the relay, it is
imperative that all WARNINGS and CAUTIONS in this
manual are reviewed to help prevent personal injury,
WARNING CAUTION equipment damage, and/or downtime.
• Open the relay packaging and inspect the unit for physical damage.
• View the rear nameplate and verify that the correct model has been ordered.
• Ensure that the following items are included:
– Instruction Manual
– GE enerVista CD (includes software and relay documentation)
– mounting screws
– registration card (attached as the last page of the manual)
• Fill out the registration form and mail it back to GE Multilin (include the serial
number located on the rear nameplate).
• For product information, instruction manual updates, and the latest software
updates, please visit the GE Multilin website at
multilin.
If there is any noticeable physical damage, or any of the contents listed are
missing, please contact GE Multilin immediately.
GE Multilin contact information and call center for product support:
GE Multilin
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
Telephone: (905) 294-6222, toll-free 1-800-547-8629 (North America only)
Fax: (905) 201-2098
E-mail: multilin.tech@indsys.ge.com
Home Page: http://www.GEindustrial.com/multilin
http://www.GEindustrial.com/multilin
745
Transformer Management Relay
http://www.GEindustrial.com/
1–1