Oracle Sun Netra T5440 Service Manual page 30

Detecting Faults
-> show faulty
Target | Property
--------------------+------------------------+-------------------------------
-----------------------------------------------------------------------------
Example of the show faulty command displaying an environmental fault:
■
-> show faulty
Target | Property
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru
/SP/faultmgmt/0 | timestamp
/SP/faultmgmt/0/ | timestamp
/SP/faultmgmt/0/ | sp_detected_fault
faults/0 |
|
Example showing a fault that was detected by POST. These kinds of faults are identified
■
by the message Forced fail reason where reason is the name of the power-on routine that
detected the failure.
-> show faulty
Target | Property
--------------------+------------------------+--------------------------------
/SP/faultmgmt/0 | fru
/SP/faultmgmt/0 | timestamp
/SP/faultmgmt/0/ | timestamp
faults/0 |
/SP/faultmgmt/0/ | sp_detected_fault
faults/0
Example showing a fault that was detected by the PSH technology. These kinds of faults are
■
identified by the text Host detected fault and by a UUID.
-> show faulty
Target | Property
--------------------+------------------------+--------------------------------
/SP/faultmgmt/0 | fru
/SP/faultmgmt/0 | timestamp
/SP/faultmgmt/0/ | sunw-msg-id
faults/0 |
/SP/faultmgmt/0/ | uuid
faults/0 |
/SP/faultmgmt/0/ | timestamp
faults/0 |
30 Sun Netra T5440 Server • September 2015
| Value
| Value
| /SYS/FANBD0/FM0
| Dec 14 23:01:32
| Dec 14 23:01:32 faults/0
| TACH at /SYS/FANBD0/FM0/F0 has
| exceeded low non-recoverable
| threshold.
| Value
| /SYS/MB/CMP0/BR1/CH0/D0
| Dec 21 16:40:56
| Dec 21 16:40:56
|
| /SYS/MB/CMP0/BR1/CH0/D0
| Forced fail(POST)
| Value
| /SYS/MB/CMP0/BR0/CH1/D0
| Dec 14 22:43:59
| SUN4V-8000-DX
|
| 3aa7c854-9667-e176-efe5-e487e520
| 7a8a
| Dec 14 22:43:59
|