Pci Cards On The Pci Auxilliary Board - Oracle Sun Netra T5440 Service Manual

4.1 PCIe, PCI-X, and XAUI Card Configuration Reference
Rear Panel Features and Connector Locations
FIGURE 4-1
Figure Legend
1
PCI Slots 0-3: left to right: PCI-X Slot 0 (25 W maximum load), PCI-X Slot 1 (25 W maximum load), PCIe Slot 2 (75 W maximum
load), PCIe Slot 3 (75 W maximum load) Note - Only one 75 W PCIe card can be installed in the server at one time. It is suggested to
install the 75 W card in Slot 2 for better cooling.
2
PCI (or XAUI) Slots 4-6 and PCIe Slots 7-9: left to right: PCIe or XAUI Slot 4 (15 W maximum load), PCIe or XAUI Slot 5 (15 W
maximum load), PCIe Slot 6 (15 W maximum load), PCIe Slot 7 (15 W maximum load), PCIe Slot 8 (15 W maximum load), PCIe Slot
9 (15 W maximum load)
3
Service Processor Serial Management Port
4
ServIce Processor Network Management Port
5
Gigabit Ethernet ports left to right: NET0, NET1, NET2, NET3
6
Power Supply LEDs (each PSU) top to bottom: Output On LED (Green), Service Required LED (Amber), Input Power OK LED
(Green)
7
Power supplies (PSs): left to right: PS 0, PS 1, PS 2, PS 3
8
USB ports left to right: USB2, USB3
9
TTYA serial port
4.1.1

PCI Cards on the PCI Auxilliary Board

Slot 0 and Slot 1 are 133MHZ PCI-X slots and support form factor PCI-X cards. The maximum
power for each slot is 25 Watts.
72 Sun Netra T5440 Server • September 2015