Remove The Fb-Dimm Fan Assembly (Fan Tray 2) - Oracle Sun Netra T5440 Service Manual

Remove the FB-DIMM Fan Assembly (Fan Tray 2)

Prepare the server for FB-DIMM fan removal. See:
1.
"Power Off the Server" on page 59
■
"Disconnect Cables From the Server" on page 60
■
■ "Remove the Server From the Rack" on page 60
"Perform Antistatic Measures" on page 61
■
"Remove the Top Cover" on page 62
■
Loosen the green FB-DIMM fan assembly captive screw..
2.
Removing the FB-DIMM Fan Assembly
FIGURE 5-9
Pull the FB-DIMM fan assembly out of the chassis.
3.
4. Set the FB-DIMM fan assembly aside on an antistatic mat.
5. Continue to "Install the Hard Drive Fan Assembly (Fan Tray 1)" on page
Remove the FB-DIMM Fan Assembly (Fan Tray 2)
Chapter 5 • Replacing Chassis Components
139.
141