Install The System Fan Assembly (Fan Tray 0) - Oracle Sun Netra T5440 Service Manual

Install the System Fan Assembly (Fan Tray 0)

4. Set the fan assembly aside on an antistatic mat.
5. Consider your next step:
If you removed the fan assembly as part of another procedure, return to that
■
procedure.
■ Otherwise, continue to
0)" on page
Install the System Fan Assembly (Fan Tray 0)
Remove the replacement fan assembly from its packaging and place it on an
1.
antistatic mat.
2. Insert your forefinger and thumb into the holes at the top of the fan assembly,
squeeze them together, and lower the fan assembly into the chassis
Ensure the fan tray is fully inserted into the connector.
136 Sun Netra T5440 Server • September 2015
"Install the System Fan Assembly (Fan Tray
136.
(Figure 5-6).