Administrator Settings - Avaya D100 Installation And Administration Manual

Administration and maintenance

Administrator settings

Press the More.. soft key twice and press the Config soft key to enter the Administrator
Setting menu.
The Administrator Setting menu has configurable options and lists of information which only
an administrator can reach. Entering the menu requires the use of an administrator password.
Since many of the following procedures begin with the Administrator Setting menu, do not
misplace the administrator password.
By default, this password is 7 8 2 8 8 7 6. To change the password, see
change on page 61.
Note:
The moment you enter the Administrator Setting menu on a handset, the system refuses
entry to all other handsets connected to that base station. Any attempt to enter the menu
on another device results in the message Denied.
Procedure
1. In the configuration menu, navigate to Administrator Setting and press the Select
2. Enter the administrator password, and press the OK soft key. Press the Del soft key
3. If the password is correct, navigate to the desired menu.
Related topics:
DECT PIN change
Administrator password change
Diagnostics
Reset base station
Check firmware update
Error information
DECT PIN change
You can change the DECT PIN using the following procedure. If the system has more than one
base station, you should assign each base station a unique DECT PIN to prevent registration
to an unintended base station.
60 D100 SIP Wireless Terminal Installation and Administration Guide
soft key.
to delete the last character entered.
By default, the administrator password is 7 8 2 8 8 7 6 (or 'Q U A T T R O').
If the password is incorrect, the display reads Failed and the handset emits an error
tone before returning to the main menu.
on page 60
on page 62
on page 63
on page 63
on page 63
Comments? infodev@avaya.com
on page 61
Administrator password
December 2012