Avaya D100 Installation And Administration Manual page 65

IP address
Subnet mask
DHCP setting
Default gateway
SIP controller
Ping Reply setting
Destination Unreachable
Ethernet information
Statistics information
MAC address
View the MAC address using the following procedure.
Procedure
1. Access the Network submenu, navigate to MAC Address, and press the Select
2. Press the Back soft key to return to the menu list.
IP address
View and edit the IP address using the following procedure.
Procedure
1. Access the Network submenu, navigate to IP Address, and press the Select soft
2. Administrators have the option to edit the address using the Edit soft key.
3. Press Edit and enter the IP address manually using the keypad. The << and >> soft
4. When you are satisfied with the address, press the OK soft key.
5. If the IP address is valid, the handset requests confirmation to complete the change.
D100 SIP Wireless Terminal Installation and Administration Guide
on page 65
on page 66
on page 66
on page 67
on page 67
on page 68
on page 68
on page 68
on page 69
soft key.
The handset display shows the MAC address.
For example:
MAC: 00.1A.2B.3C.4D.5E
key.
The handset display shows the IP address.
For example:
IP Addr: 192.168.100.200
Otherwise, you can only view and exit the IP address menu in read-only mode and
you will not be able to perform the following steps.
keys move the cursor in that direction. Press More.. to access the Dot soft key which
you can use to place a dot, or decimal, in the IP address.
If you enter an invalid IP address in step 3, the handset emits an error tone.
Press Yes to complete the change or No to cancel the change.
Overview
December 2012 65