Avaya D100 Installation And Administration Manual page 73

Setting log parameters
You can configure two types of logs: critical logs and system logs.
• Critical log (Critical.log):
The Critical log saves Reboot and Firmware update events. The size of the Critical.log
file is greater than 300Kb and you can save more than 600 events.
• System log (System.log):
According to the System.log parameter for Log Level, and whether or not saving the log
is enabled, you can save all kinds of system log information, such as network, SIP, RF,
etc. The size of the System.log file is approximately 1Mb.
The Log Level determines the corresponding system log parameters as follows:
- Level 1: INFO log saved.
- Level 2: INFO and ERROR logs are saved (Default).
- Level 3: INFO, ERROR and WARNING logs are saved. Set this level for heavy
testing and RF-related problems.
- Level 4: INFO, ERROR and WARNING and DEBUG logs are saved. Set this level
for system and SIP-related problems.
- Level 5: INFO, ERROR, WARNING, DEBUG and TRACE logs are saved.
Downloading statistical information
You can download statistical information using the Statistic Information link. Clicking on the
link downloads the StatisticInformation.log file that contains the parameters listed in the table
found under
Related topics:
Using SSL VPN
D100 SIP Wireless Terminal Installation and Administration Guide
Statistics information
on page 74
on page 69.
Overview
December 2012 73