Device Configuration Using A 46Xxsettings.txt Settings File - Avaya Vantage Installing And Administering

Hide thumbs Also See for Vantage:

Table of Contents

Parameter

Description

Because the firmware files are digitally signed, TLS is not required for security. But

configuration files are not digitally signed, so it is recommended to use HTTPS servers for

storing configuration and firmware files.

ICMPDU

Controls the extent to which ICMP destination unreachable messages are sent in response

to messages sent to closed ports so as not to reveal information to potential hackers.

The default value is 1. Use this value to send destination unreachable messages for closed

ports used by the traceroute command.

ICMPRED

Controls whether ICMP Redirect messages are processed. The default value is 0, which

means that redirect messages are not processed.

L2Q

802.1Q tagging mode. The default value is 0 for the automatic tagging mode.

L2QVLAN

VLAN ID of the voice VLAN. The default value is 0.

PROCPSWD

Security string used to access local procedures. The default value is 27238.

REUSETIME

Specifies IP address reuse timeout, in seconds. The default value is 60.

SIP_CONTR

SIP proxy or registrar server IP or DNS addresses that can be 0 to 255 characters. Enter

OLLER_LIST

the IP address in the dot-decimal notation. For example: 127.0.0.1. You can provide

several IP addresses separated by commas and without spaces between entries. The

default is null, which means there are no controllers.

TIMEZONE

Time zone configuration in the Olson name format. For example, America/New_York or

Europe/Isle_of_Man.

TLSDIR

Used as a path name that is prepended to all file names used in HTTPS GET operations

during initialization. The string length can be from 0 to 127.

TLSPORT

Destination TCP port used for requests to an HTTPS server ranging from 0 to 65535. The

default value is 443, which is the standard HTTPS port.

TLSSRVR

IP addresses or DNS names of Avaya file servers used to download configuration and

firmware files. Transport Layer Security (TLS) is used to authenticate the server and to

provide encrypted data exchange between Avaya Vantage

USER_AUTH

Specifies the user authenticated file server URL. Enter the address using either the dot-

_FILE_SERV

decimal or domain name format. Add a port number, if required. In the current release,

ER_URL

Avaya Vantage

VLANTEST

The number of seconds to wait for a DHCPOFFER on a non-zero VLAN. The default value

is 60 seconds.