Configuring The Base Station - Avaya D100 Installation And Administration Manual

System configuration
Ensure that you associate a SIP DECT Extension with a single SIP DECT Line.
Before you begin
Install IP Office Manager and connect it to a fully functioning IP Office. Obtain an Avaya IP
Endpoint license for each D160 handset. The user consumes the license while they are logged
in and they stop consuming the license when they log out.
Obtain any licenses, such as Power user or Mobile user licenses, that provide the user with
additional features.
The user does not require licensing specific to the base station.
Related topics:

Configuring the base station

Configuring the extensions
Configuring the static IP parameters for the base station
Configuring the base station
Procedure
1. In IP Office Manager, open the Line menu for the desired IP Office control unit.
2. Right-click any line and select New > SIP DECT Line.
3. Configure Base Name and Base MAC Address. You do not need to configure the
MAC address if only one base station is configured.
22 D100 SIP Wireless Terminal Installation and Administration Guide
on page 22
on page 23
Comments? infodev@avaya.com
on page 25
December 2012