Avaya D100 Installation And Administration Manual page 32

Hardware preparation and installation
2. Identify all of the people in the environment who will use a D160 handset.
3. Identify the location where you want to install a base station.
Start with one base station and determine the coverage of that base station in step
4, then include additional base stations, if necessary.
The following image demonstrates the floor plan for a sample company.
4. Using the base station as the center, draw a circle with 160 foot (50 meter) radius.
This circle indicates the typical coverage area of the base station. Note that the
coverage area goes in all directions, horizontally and vertically.
The following image demonstrates a complete floor plan showing coverage for a
single base station.
32 D100 SIP Wireless Terminal Installation and Administration Guide
Comments? infodev@avaya.com
December 2012