Configuring The D100 Using The Base Station Web Management Interface - Avaya D100 Installation And Administration Manual

System configuration
Configuring the D100 using the Base Station Web
Management Interface
In an IP Office deployment scenario that requires static addressing, you must configure the
static IP parameters of the base station using the Base Station Web Management Interface so
that the base station can connect to IP Office and download the necessary configurations.
For information on accessing the interface, see
page 71.
Procedure
1. Log into the Base Station Web Management Interface and select Configuration
2. Configure the parameters for IP Address, Subnet Mask, Default Gateway, and
3. For DHCP Setting, select the off radial button.
4. Click SAVE and confirm the operation.
26 D100 SIP Wireless Terminal Installation and Administration Guide
Parameters from the side menu.
The Configuration Parameters window lists the base station details, as shown in
the following image:
Configuration Server.
If you modify any parameters, the base station reboots.
Comments? infodev@avaya.com
Base Station Web Management Interface on
December 2012