Updating Base Station Firmware - Avaya D100 Installation And Administration Manual

The Reboot Base Station option is available under the Setting Menu in the left navigational
pane.
After rebooting the base station, the base station reverts to factory default settings. Rebooting
the base station clears the following parameters from the base station:
• Configuration file information (D100.cfg, D100settings.txt, D100prov.txt, Language file)
• User login information
• Log (System log)
• Local directory
• Call log

Updating base station firmware

IP Office automatically updates the D100 base station firmware, but only if IP Office Manager
is configured such that the system's memory card is the source for the files used by the
D100.
In IP Office Manager, navigate to the System > System tab and ensure that the Phone File
Server Type is set to Memory Card, as the following image demonstrates.
Once the correct Phone File Server Type is set, IP Office can automatically upgrade the base
station firmware when IP Office reboots. The firmware downgrade procedure uses the same
method and requires the same configuration in IP Office Manager.
D100 SIP Wireless Terminal Installation and Administration Guide
Overview
December 2012 75