Avaya D100 Installation And Administration Manual page 67

Default gateway
View and edit the default gateway using the following procedure.
Procedure
1. Access the Network submenu, navigate to Default Gateway, and press the Select
2. Administrators have the option to edit the address using the Edit soft key.
3. If you press Edit, you can enter the default gateway manually using the keypad.
4. When you are satisfied with the address, press the OK soft key.
5. If the address is valid, the handset requests confirmation to complete the change.
SIP controller
You can view and edit the SIP controller settings using the following procedure.
Procedure
1. Access the Network submenu, navigate to SIP Controller, and press Select.
2. Administrators can edit the SIP controller IP address using the Edit soft key. If you
3. If you press Edit, you can enter the SIP controller IP address manually using the
4. When you are satisfied, press the OK soft key.
5. If the address is valid, the handset requests confirmation to complete the change.
D100 SIP Wireless Terminal Installation and Administration Guide
soft key.
The handset display shows the default gateway.
For example:
Gateway: 192.168.100.1
Otherwise, you can only view the default gateway menu in read-only mode and you
will not be able to perform the following steps.
If you enter an invalid default gateway address in step 3, the handset emits an error
tone.
Press Yes to complete the change, or press No to cancel the change.
In either case, the handset returns to the menu list.
The handset display shows the SIP controller IP address.
For example:
SIP: 192.168.100.100
are not an administrator, you can only view and exit the SIP controller menu in read-
only mode and you will not be able to perform the following steps. Similarly, if DHCP
is enabled, the Edit soft key will not be available.
keypad.
If you entered an invalid address in step 3, the handset emits an error tone.
Press Yes to complete the change, or press No to cancel the change.
Overview
December 2012 67