Avaya D100 Installation And Administration Manual page 66

Administration and maintenance
Subnet mask
You can view and edit the subnet mask using the following procedure.
Procedure
1. Access the Network submenu, navigate to Subnet Mask, and press the Select
2. Administrators have the option to edit the subnet mask using the Edit soft key.
3. If you press Edit you can enter the subnet mask manually using the keypad.
4. When you are satisfied, press the OK soft key.
5. If the subnet mask is valid, the handset requests confirmation to complete the
DHCP setting
View and edit (enable or disable) the DHCP setting using the following procedure.
Procedure
1. Access the Network submenu, navigate to DHCP Setting, and press the Select
2. Administrators can enable or disable DHCP by selecting either DHCP Enable or
66 D100 SIP Wireless Terminal Installation and Administration Guide
The handset returns to the menu list.
soft key.
The handset display shows the subnet mask.
For example:
Subnet: 255.255.255.0
Otherwise, you can only view and exit the subnet mask menu in read-only mode
and you will not be able to perform the following steps.
Similarly, if DHCP is enabled, the Edit soft key will not be available. In this case,
press the Back soft key to return to the previous menu.
The handset emits an error tone if you entered an invalid subnet mask in step 3.
change. Press Yes to complete the change and No to cancel the change.
In either case, the handset returns to the menu list.
soft key.
The handset display shows the DHCP setting. The default value is On.
Press the Back soft key or the Off-Hook button to return to the menu list.
DHCP Disable using the Select soft key. If you did not enter the administrator
password, you can only view the DHCP setting in read-only mode.
After selecting a new setting, a confirmation message displays on the handset for
three seconds.
The handset emits a confirmation tone before returning to the menu list.
Comments? infodev@avaya.com
December 2012