Avaya D100 Installation And Administration Manual page 77

4. In the D160 Handset Writer, click the Port Scan button to populate the list of newly
5. Connect the Upgrade Jig to the handset using the headset jack and remove the
6. Click the Start button on the Writer application, then reinstall the battery.
7. If successful, the status display reads Update complete.
D100 SIP Wireless Terminal Installation and Administration Guide
Identify the status display in the D160 Handset Writer.
available ports.
The Writer application highlights and selects the port number allocated in the
Upgrade Jig.
battery from the handset.
The writing begins. The writing process should take less than a minute to
complete.
If the handset was not detected by the application, the status display reads Handset
not detected.
If unsuccessful, the status display reads Update failed. If the update fails:
• Check the connection between the Upgrade Jig and the handset.
• Ensure that the handset has a fully-charged and compatible battery.
Overview
December 2012 77