Network Settings - Avaya D100 Installation And Administration Manual

Ip office sip wireless terminal

Hide thumbs Also See for D100:

Table of Contents

Administration and maintenance

Procedure

1. From the Administrator Setting menu, use the Next and Prev keys to navigate to

2. Press the Back soft key or the Off-Hook button to return to the menu list.

Network settings

Press the More.. soft key twice and press the Config soft key to enter the Network menu.

In the Network menu, you can view various network parameters in read-only mode. You can

only edit the network settings if you correctly enter the administrator password at the prompt.

You should only configure network settings in troubleshooting scenarios where IP Office

Manager and System Status Application are unavailable.

The following submenus are available under the Network menu:

• MAC Address

• IP Address

• Subnet Mask

• DHCP Setting

• Default Gateway

For the changes to take effect, reboot the base station after you make changes to the network

parameters.

Caution:

Do not attempt to change IP parameters on the D100 without careful instruction. Be cautious

when configuring network settings so as not to corrupt the configuration file.

Procedure

1. From the main menu, use the Next and Prev soft keys to navigate to Network and

2. Enter the administrator password, if available.

Table of Contents