Laser Module Status Lights - Christie CP42LH Installation Manual

Laser module status lights

This diagram shows the location of the laser module LED status lights. The laser module is off when
the Power LEDs are off.
LED Red
LASER ARMED
A
POWER
B
ENABLE
C
INTERLOCK Not blinking:
D
external interlock
failure
Blinking: IR
interlock failure
WARN/FAULT Fault (laser module
E
does not turn on or
has turned off)
CP42LH Installation Guide
020-101373-02 Rev. 1 (06-2015)
Green Amber
On (lasers are Standby (Chiller
active and emitting) and fans running)
OK
No fault Warning (laser
module is on but a
laser temperature
or voltage is above
the warning
threshold)
Laser Safety Precautions
White
Armed (Interlocks OK,
lasers are charged; may
or may not be emitting)
Lasers are active and
emitting
21