Table of Contents
Advertisement
4. Install zoom gear ring and adapter onto the lens.
• Use a small adapter for lens 1.8–3.0 (2K) / 1.63–2.71 (4K).
• Use a large adapter for lens 1.45–2.05 (2K) / 1.31–1.85 (4K), 2.15–3.6 (2K) / 1.95–3.26
• All other lenses do not need an adapter.
5. Verify the placement of the following is correct.
a. The flag is centered in the sensor (A).
b. There is full travel of the gear ring (B).
c. A gap between the gears prevents binding; if necessary, loosen the screws to adjust the
gap, then tighten the screws to secure (B).
CP42LH Installation Guide
020-101373-02 Rev. 1 (06-2015)
(4K), 1.25–1.83.1 (2K) / 1.13–1.66 (2K)
A
B
C
Installation
42
Advertisement
Table of Contents
