Adjust formatter convergence
Remove all jewelry (rings, watches, necklaces, bracelets and so on) before adjusting
convergence.
Do not apply excessive force on the adjustment screws. This might cause the convergence
adjustment to become misaligned once you remove the adjustment tool.
The red and green formatters are identical in physical layout and adjuster function. The blue
formatter board is slightly different in physical layout, but the adjustment functions are the same.
The twist and vertical adjustments interact with each other on the horizontal axis.
Screen / Screw
A
N/A
N/A
CP42LH Installation Guide
020-101373-02 Rev. 1 (06-2015)
A
B
B
N/A
N/A
C
N/A
N/A
N/A
N/A
Adjust the Image
C
64