Table of Contents
Advertisement
18. Insert the cable with the dowel pin and dowel hole lined up. Insert the cable all the way in until
it stops.
19. Finger-tighten the coupler to secure the fiber optic connection.
20. Attach the tethered end cap from the fiber optic bundle to the threaded hole on the base of the
projector.
21. Replace the breakout ferrule on the fiber optic strain relief with the four screws removed in step
7.
22. Replace the cover of the fiber optic strain relief with the four screws removed in step 3.
23. Close and lock the Optical Access door.
CP42LH Installation Guide
020-101373-02 Rev. 1 (06-2015)
Installation
46
Advertisement
Table of Contents
