Pc Requirements; Rx System Compatibility; Strata Rx Compatibility - Vislink Strata RX Technical Reference Manual

Analog+digital portable microwave receiver
Table of Contents

Advertisement

C.8

PC Requirements

The Strata RX Configurator is designed to run on Windows -
based PCs that meet the following requirements:
Operating System Windows XP, 2000, 98, ME, or NT 4.0
COM Ports At least one serial port configured as COM1,
COM2, COM3, or COM4
Processor Speed 200MHz minimum
Memory 128K RAM minimum
Strata RX Technical Reference Manual
C.9

RX System Compatibility

This section will give you compatibility information for the
Cofigurator software and the RX System. For Compatibility with
various PCs, see "PC Requirements" on page C-22.
C.9.1

Strata RX Compatibility

MRC is continually improving both the Strata RX and its
configurator software. To be sure you have the correct
Configurator for your RX, follow the steps below.
1.
Power up your RX (both RXU and RCU).
2.
Watch the display carefully and note the revision
number. See Figure C-17.
Figure C-17: Typical Firmware Version Screen
Firmware
Version
3.
Start the Configurator software. The RX does not need
to be connected to your PC.
4.
On the Main Page, click the "About" button to display
the About Window. See Figure C-18.
Configurator Reference
Strata RXU
v 0.1.2
C-22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Strata RX and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents