Channels & Frequencies; Appendix Overview; Initial Factory Presets - Vislink Strata RX Technical Reference Manual

Channels &
A
Frequencies
A.1

Appendix Overview

This Appendix presents the channels and frequencies that were
programmed into your Strata RX at the factory. It also provides
the frequencies set by the latest US frequency reallocation plan.
Here are the topics covered:
Topic

Initial Factory Presets

2 GHz (Lower) Channel Plan
2 GHz (Upper) Channel Plan
3 GHz Channel Plan
5 GHz Channel Plan
7 GHz (Lower) Channel Plan
7 GHz (Upper) Channel Plan
8 GHz Channel Plan
10 GHz Channel Plan
13 GHz Channel Plan
US 2 GHz Reallocation - 12 MHz
Channel Plan
Strata RX Operator's Guide/Tech Ref Manual
Page
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
A-9
A-10
A-11
Channels & Frequencies
A.2 Initial Factory Presets
This section lists the channels and frequencies for each RF band
covered by the Strata RX. These frequencies are preset at the
factory, but can be modified using the Strata RX configurator
software.
Note These frequency settings should only be changed
by qualified technical personnel.
A-1