Configuration Items - Freescale Semiconductor DSP56800E User Manual

Hide thumbs Also See for DSP56800E:

Table of Contents

Configuration Items

This section summarizes the symbols used in macro definitions for the static COP module

configuration by the driver initialization routine. Configuration symbols are intended for the

application (project) specific configuration file appconfig.h. See e.g. Example 5-84 for more

COP_COPTO_INIT

COP_COPCTL_INIT

API Specification

This section specifies the exact usage for each API function.

Function arguments for each routine are described as in, out, or inout.

1. in argument means that the parameter value is an input only to the function.

2. out argument means that the parameter value is an output only from the function.

3. inout argument means that a parameter value is an input to the function, but the same

parameter is also an output from the function.

Note: inout parameters are typically input pointer variables in which the caller passes the address

of a pre-allocated data structure to a function. The function stores its results within that data

structure. The actual value of the inout pointer parameter is not changed.

ioctl call(s):

The ioctl call is generally represented by one of the following forms:

UWord16 ioctl(const int *pModuleBase, void Cmd, UWord16 param);

UWord16 ioctl(const int *pModuleBase, void Cmd, void* pParam);

Description: The ioctl call "changes" the COP device modes or accesses the COP register(s). The

third ioctl parameter is either a value or a pointer, depending on the type of Cmd.

Table 5-78. COP Configuration Items for appconfig.h

Table 5-79. COP Driver Arguments - ioctl

Targeting 56F8xxx Platform

The initial value of the COP

Time-out Register

Initial value of the COP Control

COP module identifier. Use COP.

Commands found in cop.h which are used

to modify the COP module status and con-

trol registers. See Table 5-80.

FREESCALE SEMICONDUCTOR

Table of Contents