Configuration Items - Freescale Semiconductor DSP56800E User Manual

Hide thumbs Also See for DSP56800E:

Table of Contents

Table 5-448. pwm_sOutputControl Data Structure Members

SoftwareControlled

OutputControl

Table 5-449. pwm_sUpdateValueSetVlmode Data Structure Members

Table 5-450. pwm_sChannelControl Data Structure Members

Configuration Items

This section summarizes the symbols used in macro definitions for the static configuration of the

PWM module by the driver initialization routine. These symbols are intended for the application

(project) specific configuration file appconfig.h. See e.g. Example 5-472 for more details.

PWM_x_PMCTL_INIT

PWM_x_PMFCTL_INIT

PWM_x_PMOUT_INIT

PWM_x_PWMCM_INIT

PWM_x_PWMVAL0_INIT

pwm_tPWMSignalMask

pwm_tPWMSignalMask

pwm_tPWMChannelSwap

Table 5-451. PWM Configuration Items for appconfig.h

Targeting 56F8xxx Platform

A mask to enable software control of the corre-

sponding PWM pins.

A mask to control the PWM output pins.

A data value representing a duty cycle

corresponding to the PWM Value 0 regis-

A value representing the Value Register

A mask of the PWM logical channels.

A mask to determine channel swapping operation.

Initial value of the PWM Control Register.

Initial value of the PWM Fault

Control Register.

Initial value of the PWM Output Control Reg-

Initial value of the PWM Counter Modulo

Initial value of the PWM Value

FREESCALE SEMICONDUCTOR

Table of Contents