Chapter 3
Directory Structure
This section describes the directory structure of the Freescale DSP56800E_Quick_Start tool,
located in the <...>\Freescale\DSP56800E_Quick_Start r2.3 directory. Note that the root
directory of the DSP56800E_Quick_Start may be changed during installation by the user. In
general, the DSP56800E_Quick_Start software is organized by supported devices as it is
explained in this chapter.
3.1
Root Directory
The root, or main, directory is organized as shown in Figure 3-1.
Where:
•
sample_applications contains simple application examples to demonstrate the usage of the
DSP56800E_Quick_Start tool as well as the use of device or on-chip peripherals; see also
Section 3.2.
•
src contains the C source files; see also Section 3.4.
•
stationery contains the templates for the newly created projects. Note: this directory is also installed
directly into the CodeWarrior development tool, if the path to this tool was specified by user.
•
tools contains the Graphical Configuration Tool, its configuration files, device data sheets and
peripheral user manuals which can be opened directly from the GCT.
•
user_manuals contains the DSP56800E_Quick_Start User's Manual and other documentation.
FREESCALE SEMICONDUCTOR
Figure 3-1. Root Directory Structure
Targeting 56F8xxx Platform
3-1