Configuration Items - Freescale Semiconductor DSP56800E User Manual

5.3.2.2

Configuration Items

This section summarizes the symbols used in macro definitions for the static WINTC module
configuration by the driver routines. These symbols are intended for the application (project)
specific configuration file appconfig.h. See e.g. Example 5-69 for more details.
Table 5-63. WINTC Configuration Items for appconfig.h
SYMBOL
INT_VECTOR_ADDR_n
('n' for any interrupt except
the ones with fixed priority
levels)
WINTC_ICSR_INIT
WINTC_VBA_INIT
WINTC_IAR0_INIT
WINTC_IAR1_INIT
WINTC_IAR2_INIT
5-88
TYPE
function identifier Installs the specified function as the interrupt service routine
for the interrupt source n.
UWord16 Initial value for the WINTC Control Register.
UWord16 Initial value for the Vector Base Address Register.
UWord16 Initial value for the Interrut Assigment Register 0.
UWord16 Initial value for the Interrut Assigment Register 1.
UWord16 Initial value for the Interrut Assigment Register 2.
Targeting 56F8xxx Platform
DESCRIPTION
FREESCALE SEMICONDUCTOR