Src Directory; Stationery Directory; Src Directory Structure - Freescale Semiconductor DSP56800E User Manual

Hide thumbs Also See for DSP56800E:

Table of Contents

Src Directory

The src or "source" directory is intended to hold all source files. Its structure is shown in

Figure 3-3. The src directory is further divided into the following subdirectories:

algorithms (optional) can contain the distributed algorithms and the user algorithms

MC56F8xxx is the directory specific for each of the supported devices. The subdirectory

peripheral contains the source code for all on-chip peripheral drivers and the system subdirectory

contains the device specific source files

include contains the common DSP56800E_Quick_Start header files, which define APIs and the

implementation of generally used macro's

support contains other common DSP56800E_Quick_Start source files. The subdirectory

freemaster contains the source files to enable the FreeMASTER operation on the target board

application. The other two directories, compat and pc_master, are there because of compatibility

with older DSP56800E_Quick_Start releases.

The stationery directory contains the templates for the newly created DSP56800E_Quick_Start

projects. This directory is also copied into the CodeWarrior development tool directory if a proper

path was specified by the user. This directory may be needed to be copied manually into other

CodeWarrior versions present on the host computer or into the CodeWarrior versions installed

after the DSP56800E_Quick_Start was installed. See the detailed guide in Section 1.2.2.1.

FREESCALE SEMICONDUCTOR

Figure 3-3. Src Directory Structure

Targeting 56F8xxx Platform

Src Directory

Table of Contents