Diagnostic Trouble Codes (Dtcs) - Polaris IQ 2007 Service Manual

Fuel Systems

Diagnostic Trouble Codes (DTCs)

T C
ROUBLE
Throttle Position Sensor Unrealistic
Transition
Throttle Position Sensor Voltage High
Throttle Position Sensor Voltage Low
Engine Coolant Temperature Sensor
Voltage High
Engine Coolant Temperature Sensor
Voltage Low
Intake Air Temperature Circuit Voltage
High
Intake Air Temperature Circuit Voltage Low P0112
Barometric Pressure Sensor Voltage High
Barometric Pressure Sensor Voltage Low
Exhaust Temperature Sensor Circuit
Voltage High
Exhaust Temperature Sensor Circuit
Voltage Low
Detonation Sensor Circuit Voltage High
Detonation Sensor Circuit Voltage Low
Exhaust Valve Solenoid Circuit
Malfunction
4.16
CFI Diagnostic Trouble Codes
P-C
ODE ODE
P0120
P0123
P0122
P0118
P0117
P0113
P0108
P0107
P0546
P0545
P0328
P0327
P1477
MFD B
LINK
C
ODE
TPS signal changes too rapidly to be correct. Can be
caused by faulty connections or a faulty TPS.
TPS signal is above 4.39 Vdc. Can be caused by a
1
faulty wire connection or faulty TPS.
TPS signal is below 0.7 Vdc. Can be caused by a
faulty wire connection or faulty TPS.
Sensor signal is above 4.8 Vdc. Can be caused by a
faulty wire connection or faulty temperature sensor.
2
Sensor signal is below 0.1 Vdc. Can be caused by a
faulty wire connection or faulty temperature sensor.
Sensor signal is above 4.9 Vdc. Can be caused by a
faulty wire connection or faulty TBAP.
3
Sensor signal is below 0.19 Vdc. Can be caused by a
faulty wire connection or faulty TBAP.
Sensor signal is above 3.23 Vdc. Can be caused by a
faulty wire connection or faulty TBAP.
4
Sensor signal is below 1.25 Vdc. Can be caused by a
faulty wire connection of faulty TBAP.
Sensor signal is above 4.9 Vdc for at least 2 minutes
and the engine has been running at or above 3000
RPM.
5
Sensor signal is below 0.06 Vdc for at least 2 minutes
and the engine has been running at or above 3000
RPM.
Engine speed is above 6000 RPM and the sensor
signal is above 4.3 Vdc for at least 2 seconds.
6
Engine speed is above 6000 RPM and the sensor
signal is below 1.23 Vdc for at least 2 seconds.
Solenoid control circuit is OPEN. Can be caused by
8
faulty wiring, solenoid, or ECU.
D
ESCRIPTION