Iq 121 Heavy Torsion Spring Installation - Polaris IQ 2007 Service Manual

Hide thumbs Also See for IQ 2007:

Table of Contents

IQ 121 Heavy Torsion Spring Installation

Please reference the following information when installing

heavy torsion springs on IQ sleds. The issue that arises when

installing the heavy spring on a Fusion sled is that the coil stack

of the torsion spring is wide enough to interfere with the

Steering and Suspensions

suspension arm clamp nut. To work around this issue you will

need to order two (one for each side) of the following parts.

Relocate the two washers that are next to the clamp nut to the

outside of the link arm.

Table of Contents