Polaris IQ 2007 Service Manual page 235

Steering and Suspensions
IQ 136 Coupled Front / Rear Torque Arms
FRONT TORQUE ARM
A
A
LIMITER STRAPS
A = 12 Ft.Lb. (16 Nm)
B = 35 Ft.Lb. (47 Nm)
C = 45 Ft.Lb. (61 Nm)
D = 60 Ft.Lb. (81 Nm)
Assembly Notes
• Never re-use Nylock nuts. Always replace with new
parts.
• All pivots must rotate freely after tightening fasteners.
8.32
B
C
B
O RING
D
UPPER SHAFT
REAR TRACK SHOCK
B
SHOCK ROD
= T
SHOCK ASSEMBLY
SHAFT
BUSHING
SHAFT
B
B
SLEEVE
CARRIER WHEEL
TORSION SPRING
• Apply Polaris Premium All Season Grease to all grease
zerks as outlined in the periodic maintenance table.
The fasteners securing the rear suspension to the
tunnel are pre-coated with a locking agent when new.
Never re-use these fasteners when removed. Always
use new pre-coated fasteners when mounting the
REAR PIVOT (SCISSOR)
REAR TORQUE ARM
B
D
B
MOUNTING ARM
CAUTION
suspension to the tunnel.