Table of Contents
Advertisement
M-10 136 Front / Rear Torque Arms
LIMITER STRAP
A = 12 Ft.Lb. (16 Nm)
B = 35 Ft.Lb. (47 Nm)
C = 70 Ft.Lb. (94 Nm)
Assembly Notes
• Never re-use Nylock nuts. Always replace with new
parts.
• All pivots must rotate freely after tightening fasteners.
FRONT TORQUE ARM
A
A
B
SHOCK ASSEMBLY
CARRIER WHEEL
MID TRACK SHOCK
(M-10 ACE ONLY)
B
= T
Steering and Suspensions
SHAFTS
C
B
B
UPPER SHAFT
SPACER
• Apply Polaris Premium All Season Grease to all grease
zerks as outlined in the periodic maintenance table.
CAUTION
The fasteners securing the rear suspension to the
tunnel are pre-coated with a locking agent when new.
Never re-use these fasteners when removed. Always
use new pre-coated fasteners when mounting the
suspension to the tunnel.
SHOCK ASSEMBLY
Fastener = 35 Ft.Lb. / 47 Nm)
REAR TORQUE ARM
LOWER SHAFT
SET SCREW
C
8.23
8
Advertisement
Chapters
Table of Contents
