Polaris IQ 2007 Service Manual page 232

IQ 136 Comfort Front / Rear Torque Arms
FRONT TORQUE ARM
A
A
O-RING
INNER SHAFT
LIMITER STRAPS
A = 12 Ft.Lb. (16 Nm)
B = 40 Ft.Lb. (54 Nm)
C = 35 Ft.Lb. (47 Nm)
Assembly Notes
• Never re-use Nylock nuts. Always replace with new
parts.
• All pivots must rotate freely after tightening fasteners.
BUSHING
BUSHING
B
C
BUSHING
C
BUSHING
= T
Steering and Suspensions
C
REAR TORQUE ARM
C
BUSHING
SHOCK ROD
CARRIER WHEEL
SLEEVE
BUSHING
TORSION SPRING
• Apply Polaris Premium All Season Grease to all grease
zerks as outlined in the periodic maintenance table.
The fasteners securing the rear suspension to the
tunnel are pre-coated with a locking agent when new.
Never re-use these fasteners when removed. Always
use new pre-coated fasteners when mounting the
suspension to the tunnel.
C
REAR SCISSOR
SPRING ADJUSTER
BUSHING
C
CAUTION
B
8
8.29