Table of Contents
Advertisement
G100 Range
4.3
Instrument Connection Points
Top View:
Top View:
A
Temperature 1
B
Temperature 2
C
Humidity Probe (Optional)
D
Gas Outlet
E
Gas Inlet
Side View:
F
USB Cable Attachment Point
G
Mains Battery Charger Point
N.B. Depending on the configuration purchased, certain connectors may not be
present.
Copyright Geotechnical Instruments (UK) Limited
Side View:
Temperature 1 connector measures
differential temperature – incubator and
ambient temperatures.
Temperature 2 connector measures
differential temperature – incubator and
ambient temperatures.
Temperature connectors are fitted with
black plugs to prevent dust ingress,
remove before use. Grip connector cap
and pull upwards to release. Refit when
not in use.
Humidity probe attachment point.
Gas outlet port used to exhaust the gas.
Gas inlet point used to attach the sample
tube and filter in order to take the gas
reading.
Used to connect the analyser to a PC via a
USB cable to download data.
Used to attach the mains charger to the
analyser for charging.
-
-
-
+
+
+
5V
5V
OMG100N1.21
± 0.5V(max 1000mA)
± 0.5V(max 1000mA)
Page 13
Advertisement
Table of Contents
