tecan cavro xlp 6000 Operating Manual page 68

3 - Software Communication
Operating Commands
3 - 36
v <n> Set Start Speed
The [v] command sets the speed at which the plunger begins its movement, in
pulses/sec. The plunger will then ramp up (slope) to the top speed. The start
speed should always be less than the top speed.
<n>
Parameter
Command Value
v 50-1000
V <n> Set Top Speed
The [V] command sets the top speed in pulses/second. This command may
be sent while a command string is already executing. (See section on
Changing Speed on the Fly, earlier in this chapter.)
<n>
Parameter
Command Value
V 5-6000
Note: Syringes 2.5 mL and larger may require slower speeds. Users must
determine the appropriate speeds for their applications.
Cavro® XLP 6000 Modular Syringe Pump Operating Manual, 734237-C, en
8 20000
9 22500
10 25000
11 27500
12 30000
13 32500
14 35000
15 37500
16 40000
17 42500
18 45000
19 47500
20 50000
Default
Value Description
900 Set start speed in pulses/sec
Default
Value Description
900 Set top speed in pulses/sec