D Chemical Resistance Chart - tecan cavro xlp 6000 Operating Manual

D Chemical Resistance Chart

Table D-1 Plastic Materials Used in Tecan Pumps
Cavro® XLP 6000 Modular Syringe Pump Operating Manual, 734237-C, en
The information provided in the table that starts on the next page has been
supplied to Tecan Systems by other reputable sources and is to be used ONLY as
a guideline. Before permanent installation, test the equipment with the chemicals
under the specific conditions of your application.
Ratings of chemical behavior listed in this chart apply to a 48-hour exposure
period; Tecan Systems has no knowledge of possible effects beyond this period.
Tecan Systems does not warrant (neither express or implied) that the information
in this chart is accurate or complete or that materials are suitable for any purpose.
Caution! Failure to test chemicals used in individual applications with the XLP
6000 may result in damage to the pump and/or test results.
DANGER! Variations in chemical behavior during handling due to factors such as
temperature, pressure and concentration can cause equipment to fail, even
though it passed an initial test. SERIOUS INJURY MAY RESULT. Use suitable
guards and/or personal protection when handling chemicals.
The materials listed in are used in the following areas of the XLP 6000:
Telfon® (PTFE, TFE, FEP)
Kel F®
Polypropylene
Ratings – Chemical Effect
A = Excellent
B = Good – Minor Effect, slight corrosion or discoloration
C = Fair – Moderate Effect, not recommended for continuous use. Softening,
loss of strength, swelling may occur.
D = Severe Effect, not recommended for ANY use.
N/A = Information Not Available
Explanation of Footnotes
1. Satisfactory to 72°F (22°C)
2. Satisfactory to 120°F (48°C)
D - Chemical Resistance Chart
Tubing, Valve Plug, Seal
Valve Body
Fittings for Tubing
D - 1