tecan cavro xlp 6000 Operating Manual page 109

A.3.5 Cavro
A.3.6 Cavro
A.3.7 Cavro
A.3.8 Cavro
Cavro® XLP 6000 Modular Syringe Pump Operating Manual, 734237-C, en
a single 24 VDC power supply and is programmable through an RS-232, RS-485
or CAN interface.
®
XL 3000 Series Multi-Channel Pumps
These pumps are based on the single channel Cavro
in 2, 4, 6, or 8 channels. Each channel has an independently operated solenoid
valve and can accommodate syringes ranging from 500 µL to 2.5 mL. The pumps
use an RS-232 or RS-485 interface and a simple command set. They can aspirate
and dispense fluids and are specifically designed for OEM applications in the
liquid handling, instrumentation, and systems markets.
®
XL Series Smart Valve
A compact, stepper motor driven module for OEM liquid handling applications, the
®
Cavro Smart Valve is available with 3-, 4-, or 6-port valves. It uses the same
communication characteristics as the Cavro
232 or RS-485 interfaces and a choice of two communication protocols. Up to
fifteen devices can be addressed individually from a single communication port.
The Smart Valve uses a single 24 V DC power supply and contains a buffered
output which can be used to drive an additional relay or solenoid.
®
XL Series Smart Peristaltic Pump
A compact, eight roller unit with 1, 2, 3, or 4 channels. Cavro
modules are stepper motor driven and are designed to provide highly reproducible
flow rates with minimum pulsing and long tubing life. The SP modules use the
same interface characteristics as the XL 3000 Modular Digital Pump: RS-232 or
RS-485 interfaces and a choice of two communication protocols. Up to fifteen
devices can be addressed individually from a single communication port. The
Smart Pump uses a single 24 V DC power supply and contains a buffered output
which can be used to drive an additional relay or solenoid.
®
Smart I/O Board
®
The Cavro Smart I/O board is a microprocessor driven PC board that allows the
operation of a number of I/O ports from an external serial line. The board can be
controlled by RS-232 or RS-485. It can also be placed on an RS-485 bus with
other Tecan Systems pumps and smart devices. The I/O signal is CMOS (0-5
volts). I/O lines include 16 inputs, 16 outputs, and four analog inputs. The board
uses a standard Cavro OEM communications protocol.
A - Ordering Information
Other Tecan Systems Products
®
XL 3000 and are available
®
XL 3000 Modular Digital Pump: RS-
®
Smart Pump
A - 7