Table of Contents
Advertisement
1 - Getting Started
Tips for Setting Up the XLP 6000
1.6
1 - 8
Pinch Point, Mechanical Hazards
Automatically moving parts may cause injuries (crushing, piercing)
Attention
The general "Read This" symbol indicates the possibility of equipment damage,
malfunction or incorrect process results, if instructions are not followed.
Tips for Setting Up the XLP 6000
For complete information on setting up the XLP 6000, see Chapter 2, "Hardware
Setup" and "Chapter 3, "Software Communication".
Note: Before performing any work with the XLP 6000, first read this Operating
Manual carefully.
To ensure proper operation, follow these tips:
Always set up and mount the pump in an upright position. Failure to do so can
cause problems priming the system.
Always run liquid through the syringe and valve when they are moving. Failure
to do so can damage the sealing surfaces.
Before running any organic solvents through the pump, see Appendix D,
"Chemical Resistance Chart" for more information on chemical compatibility.
Always power down the instrument when connecting or disconnecting pumps.
Caution! Keep fingers out of the syringe slot while the pump is running. Failure to
do so can cause injury.
Cavro® XLP 6000 Modular Syringe Pump Operating Manual, 734237-C, en
Advertisement
Table of Contents
