Figure 1-4 Xlp 6000 Printed Circuit Assembly External Connectors; Address Switch - tecan cavro xlp 6000 Operating Manual

1 - Getting Started
Functional Description of the XLP 6000
Figure 1-4
1.4.4
1 - 6
XLP 6000 Printed Circuit Assembly External Connectors
The XLP 6000 PCA has a DA-15 connector to handle power and communications.
For more information on the printed circuit assembly inputs/outputs and the
address switch, see Chapter 2, "Hardware Setup".
Communication Interfaces
Depending on the pump configuration, the XLP 6000 can communicate singly or
in a multi-pump configuration through an RS-232, RS-485, or CAN (Controller
Area Network) interface. For RS-232 and RS-485, baud rates of 9600 and 38400
are supported. For CAN, baud rates of 100K,125K, 250K, 500K, and 1M are
supported.
For details on the communications interfaces, see Chapter 2, "Hardware Setup".
Cavro® XLP 6000 Modular Syringe Pump Operating Manual, 734237-C, en