Seat Exeo 2012 Owner's Manual page 142

140 Seats and storage compartments
– Press button and pull out the head restraint.
A
Fitting the head restraint
– Insert the head restraint in its guides until it clicks into place.
Press button and lower the head restraint.
A
The height of the head restraints is adjustable. They should be set to suit
the height of the occupant. In combination with the seat belts, the head re-
straints offer effective protection, provided they are properly adjusted.
For best protection, the top of the head restraint should be at least at eye
level or higher.
Head restraints on the side rear seats
Raising the head restraint
– Take hold of the sides of the head restraint with both hands.
– Pull the head restraint up as far as it will go.
Lowering the head restraint
– Press button
Removing the head restraint
– Pull the head restraint up as far as it will go.
– Press button
Fitting the head restraint

– Insert the head restraint in its guides until it clicks into place.
Press button
When the rear seats are not occupied, the head restraints should be moved
to the lowest position so that they do not obstruct the driver's field of vi-
sion.
Fig. 112 Outer rear
seats: Head restraints
⇒ f ig. 112
and lower the head restraint.
A
⇒ f ig. 112
and pull out the head restraint.
A
and lower the head restraint.
A
