Seat Exeo 2012 Owner's Manual page 277

Remove the bulb holder
The tailgate must be open to change the bulbs.
You can access the bulb holder for the inner tail lights via the in-
side of the tailgate.
Safety First
Fig. 215 Remove the
cover from the tailgate
Fig. 216 Remove the
bulb holder
Operating Instructions
– Check which of the bulbs is defective.
– Insert a screwdriver into the opening in the cover from the top
⇒ f ig. 215
and use it as a lever to detach the cover.
⇒ f ig. 216
– Press on the tabs
A
and remove the bulb holder by pulling in the direction of the ar-
row .
B
– Change the bulbs ⇒ p age 275 ⇒ p age 276.
WARNING
If a bulb is replaced in a tail light assembly with LED, do not pull too hard
on the bulb holder. This may damage the wiring of the LED module.
Changing bulbs
All bulbs can be changed easily in the bulb holder.
Practical Tips
If and when
in the direction of the arrows
Fig. 217 Position of the
bulbs in the bulb holder.
Example: Tail lights on
the tailgate
Technical Specifications
275

