Seat Exeo 2012 Owner's Manual page 54

52 Child safety
Child seat mounting using the "ISOFIX" and/or Top Tether
system
The child retention systems can be installed quickly and
safely on the rear seat using the ISOFIX and/or Top Tether
systems (fitted on the rear tray).
Following the instructions given by the child seat manufacturer
when installing and removing the seat.
– Fit the plastic guides on the vehicle's ISOFIX anchorages be-
tween the backrest and the seat
Fig. 32 Position of the
ISOFIX anchors on the
side rear seat
– Slide the child seat anchorages along the plastic guides until
secured in the vehicle's ISOFIX rings (when correctly closed, you
will hear a "click"). The seat should also have a visual indicator
to confirm it is correctly secured
– Check that the ISOFIX system is correctly secured by pulling on
the child seat.
Detailed fitting instructions are supplied with the child safety seat.
Child seats with "ISOFIX" mountings are available from Dealers and special-
ist retailers.
Fig. 33 The ISOFIX child
seat anchors slide along
the fitted plastic guides
until secured in the vehi-
cle's ISOFIX anchorages
⇒ f ig.
32.
⇒ f ig.
33.
