Seat Exeo 2012 Owner's Manual page 263

Halogen headlight bulbs
Main beam headlights
A
Side lights
B
Dipped beam headlights
C
Side lights
D
Turn signal
E
Safety First
Fig. 189 Halogen bulbs
Operating Instructions
Changing the turn signal bulb
The procedure for changing the bulb is the same on both
sides.
– Switch off the ignition and the lights.
– Raise the bonnet.

– Turn the bulb holder anti-clockwise, pulling it by the grip
⇒ f ig. 190
and removing the bulb holder and the bulb.
– Replace the blown bulb in the bulb holder (press and turn anti-
clockwise to remove) with a new bulb (press and turn clockwise
to insert).
– Installation is done in the reverse order.
– Check whether the new bulb is working.
Practical Tips
If and when
Fig. 190 Turn signal

Technical Specifications
261