Seat Exeo 2012 Owner's Manual page 278

276 If and when
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check whether the new bulb is working.
– Re-install the bulb holder ⇒ p age 277.
Position of the bulbs
Pos.
Bulb function
⇒ f ig. 217
A Reverse light
Side light and
B
rear fog light
Changing bulbs. LED lamps
All bulbs can be changed easily in the bulb holder.
The bulb is secured with a bayonet fastening. The table below
P21W LL
gives an overview of the bulb positions.
P21W LL

– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check whether the new bulb is working.
– Re-install the bulb holder ⇒ p age 277.
Fig. 218 Position of the
bulb on the bulb holder.
Example: Tail lights on
the tailgate
